Parker Hannifin
home | products | how to buy | support & downloads | literature | search

Click Here to go to new EM&D Knowledge Base (FAQ) site


PS Connector Wiring Pinouts

The PS Connector pinouts are below. Please refer to the PS Connector Specifications and PS Cable Specifications FAQ's for further information on the connectors and cables.

PS Connector Motor Power Pinout
Connector Pin # (Size 1.0) Connector Pin # (Size 1.5)Wire Color Function
1UBlack 1Phase U
2VBlack 2Phase V
6WBlack 3Phase W
3EarthGreen/YellowEarth
4+Red/BlueBrake+ (+24 VDC)
5-Red/BlueBrake- (0 VDC)


PS Feedback Connector Pinouts
Connector Pin #SinCos(Hiperface)Incremental( or Smart) Encoder Resolver
1SIN- (REFSIN)ENC A-SIN-
2SIN+ (+SIN)ENC A+SIN+
3No ConnectNo ConnectNo Connect
4No ConnectHall 1 or A0 (or CLK+)No Connect
5Datafbk+ (Data+ RS485)Hall 2 or A1No Connect
6Datafbk- (Data- RS485)Hall 3 or A2 (or CLK-)No Connect
7No ConnectGroundNo Connect
8Jumped to Pin 13+5 VDCNo Connect
9Temp(Thermistor) +Temp(Thermistor) +Temp(Thermistor) +
10No ConnectNo ConnectNo Connect
11COS+ (+COS)ENC B+COS+
12COS- (REFCOS)ENC B-COS-
13Temp(Thermistor)-Temp(Thermistor) -Temp(Thermistor) -
14Vcc (Us 7-12 VDC)No ConnectREFres+
15No ConnectENC Z+No Connect
16No ConnectENC Z-No Connect
17GNDNo ConnectREFres- (GND)