Parker Hannifin
home | products | how to buy | support & downloads | literature | search

Click Here to go to new EM&D Knowledge Base (FAQ) site


How do I know what firmware revision my AC890 is?

a. There are different firmware Versions based on the type of application
i. Version 1.x for Induction motors (normally v3.x is used)
ii. Version 2.x for Servo motors
iii. Version 3.x for Induction and Servo motors (v3.x is the default)
iv. Version 4.x for CAMMING applications
v. Version 5.x for AFE and EGT applications
b. On the 6901 keypad
i. Depress the [E] button on the keypad until you see the Application name
ii. The next line will give the Hp, voltage and firmware version
c. On the 6511 keypad
i. Depress the [E] button on the keypad until you see the firmware version 
d. Connect to the inverter using the CM471050 cable
i. Open DSE Lite software or DSE
ii. Ensure you are using the correct COM PORT for your CM471050 cable connection
iii. Select the “Get info” button
iv. The type of drive and the firmware version will be displayed in the scratch pad

13SEP2016 LS